- Contact Person : Ms. Wang Tracy
- Company Name : KAMA International Trade & Technology Co., Ltd.
- Tel : 86-519-85202770,13813698880
- Fax : 86-519-85215520
- Address : Jiangsu,Changzhou,Rm. 311, No.1 Building, Fuhanyuan,Changzhou, Jiangsu, P.R. China
- Country/Region : China
- Zip : 213000
HT30/HT45 Plastic Vertical Injection Machine
Related Product Searches:HT30/HT45 Plastic Vertical Injection Machine,High Quality,Injection Machine, rubber injection machine,HT30/HT45
HT30/HT45 Plastic Vertical Injection Machine
The sliding plate and base is made by cast iron and sliding system has automatic lubrication device to reduce abrasive ware and the connect point use steel isolation to ensure little deformation.Ejector unit can match different side plate. The ejection stroke, ejection force, ejection speed and ejection time can preset according to demands.Single slide plate: adopt before and after or left and right reciprocating slide, the operation of insert device and fetch device is high safety.Double sliding plate adopt right and left alternatively slide, the operation of insert device and fetch device is high safety and increasing 30%-40% production capacity.We can supply the technique of automatic production line, greatly reducing the human resource cost.Technical Parameter:
Type | Unit | HT30(S/DS) | HT45(S/DS) | ||
Screw diameter | mm | 25 | 28 | 28 | 32 |
Shot volume | cm3 | 59 | 74 | 80 | 104 |
Shot weight | g(ps) | 55 | 70 | 75 | 99 |
Injection pressure | kgf/cm2 | 1850 | 1475 | 1959 | 1450 |
Injection speed | cm3/sec | 42 | 58 | 60 | 79 |
Screw speed | rpm | 180 | 200 | ||
Barrel heating power | kw | 2.9 | 3.6 | ||
Clamping unit | —— | —— | —— | ||
Clamping force | T | 30 | 45 | ||
Open stroke | mm | 200 | 225 | ||
Min. mould thickness | mm | 100/180 | 150/250 | ||
Max. mould thickness | mm | 300/380 | 375/475 | ||
Slide plater size | mm | 550×410 | 610×460 | ||
Space between tie bars | mm | 370×230 | 410×250 | ||
Ejector force | T | 1.3 | 1.3 | ||
Ejector stoke distance | mm | 40 | 40 | ||
Ejector pin No. | pc | 1 | 1 | ||
Others | —— | —— | —— | ||
Rotating plater diameter | mm | 350×350 | 350×700 | 390×420 | 390×840 |
Hydraulic pressure | kgf/cm2 | 160 | 160 | ||
Motor power | kw | 4 | 5.5 | ||
Machine dimension(L×W×H) | m | 1.35×1×2.3 | 1.4×1.1×2.4 | ||
Machine weight | T | 1 | 1.5 | ||
Type | Unit | HT60(S/DS) | HT85(S/DS) | ||||||
Screw diameter | mm | 30 | 32 | 35 | 32 | 35 | 38 | ||
Shot volume | cm3 | 106 | 120 | 144 | 129 | 154 | 181 | ||
Shot weight | g(ps) | 100 | 114 | 136 | 122 | 145 | 171 | ||
Injection pressure | kgf/cm2 | 2160 | 1898 | 1587 | 2039 | 1704 | 1446 | ||
Injection speed | cm3/sec | 65 | 74 | 88 | 80 | 96 | 113 | ||
Screw speed | rpm | 200 | 200 | ||||||
Barrel heating power | kw | 4.2 | 5.25 | ||||||
Clamping unit | —— | —— | —— | ||||||
Clamping force | T | 60 | 85 | ||||||
Open stroke | mm | 250 | 250 | ||||||
Min. mould thickness | mm | 150/250 | 170/300 | ||||||
Max. mould thickness | mm | 400/500 | 450/550 | ||||||
Slide plater size | mm | 680×540 | 740×570 | ||||||
Space between tie bars | mm | 460×310 | 510×340 | ||||||
Ejector force | T | 2.2 | 2.2 | ||||||
Ejector stoke distance | mm | 40 | 65 | ||||||
Ejector pin No. | pc | 1 | 1 | ||||||
Others | —— | —— | —— | ||||||
Rotating plater diameter | mm | 390×420 | 390×840 | 495×500 | 495×1000 | ||||
Hydraulic pressure | kgf/cm2 | 160 | 160 | ||||||
Motor power | kw | 7.5 | 11 | ||||||
Machine dimension(L×W×H) | m | 1.55×1.2×2.8 | 1.75×1.2×2.8 | ||||||
Machine weight | T | 2.1 | 2.1 | ||||||
HT30/HT45 Plastic Vertical Injection Machine
